Skip to Content

ichappsseo

Temperature, Transmitters, Rtds, Thermocouples Sensors Calibration

Submitted by • May 31, 2018

For Temperature Parameter covers the Range from -95 o +1200 Deg: All type of temperature sensors, Gauges, Ultra Cool Deep Freezer - 192 to 50 Degrees. Using the High Stability Temperature Source of Fluke make 9190 and 9150 and ...

Procedure For Operation Of UV Pass Box And Its Usage

Procedure For Operation Of UV Pass Box And Its Usage

Submitted by • April 24, 2018

ichapps.com - To lay down the Procedure for Operation of UV Pass Box and its usage. This procedure applies to UV pass box located between Testing room and Sterilization room used for transfer of materials from sterilization room into the testing area ...

Procedure For Operation And Calibration Of Oxygen Analyzer And Anaerobic Chamber

Procedure For Operation And Calibration Of Oxygen Analyzer And Anaerobic Chamber

Submitted by • April 20, 2018

ichapps.com - To lay down the procedure for operation and calibration of oxygen analyzer and anaerobic chamber. This procedure is applies to the operation and calibration of oxygen analyzer and anaerobic chamber in microbiology lab. Person from concerned department directly involved in ...

Procedure For Operation Calibration And Maintenance Of Incubators

Procedure For Operation Calibration And Maintenance Of Incubators

Submitted by • April 19, 2018

ichapps.com - To lay down the procedure for operation, calibration and maintenance of incubators. This procedure applies to incubators used in microbiology for incubation at required temperatures respectively with the following details. The responsibility of proper operation, calibration and maintenance of incubators ...

Procedure To Test The Efficacy Of UV Lamp Against Microbial Challenge

Procedure To Test The Efficacy Of UV Lamp Against Microbial Challenge

Submitted by • April 16, 2018

ichapps.com - To lay down the Procedure to test the efficacy of UV lamp against microbial challenge. This procedure applies to UV lamps of Pass box, Laminar Air Flow bench and Garments box located in the microbiology area. The responsibility of ...

Procedure For Isolation Identification And Gram Staining Of Microorganisms

Procedure For Isolation Identification And Gram Staining Of Microorganisms

Submitted by • April 16, 2018

ichapps.com - To lay down the Procedure for Isolation,Identification and Gram Staining of Microorganisms. This procedure applies to isolation, identification and gram staining of microorganisms during the course of regular microbiological analysis. The responsibility of isolation, identification and gram staining of microorganisms ...

Replacement Of Oil Seals Of Gear Boxes

Replacement Of Oil Seals Of Gear Boxes

Submitted by • March 15, 2018

ichapps.com - To describe a standard operating procedure for replacement of oil seals of gear boxes. The standard operating procedure describes in detail the method of replacing oil seals of gear boxes belongs to Process / Utilities / Laboratory equipments. The responsibility ...

Replacement Of Bearings Of Process Utilities Laboratory Equipment

Replacement Of Bearings Of Process Utilities Laboratory Equipment

Submitted by • March 15, 2018

ichapps.com - To describe a standard operating procedure for replacement of bearings of process / utilities / laboratory equipment. The standard operating procedure describes in detail the method of replacing the bearings of process / utilities / laboratory equipment. The responsibility of ...

Replacement Of Coupling Bolts Of Reactors

Replacement Of Coupling Bolts Of Reactors

Submitted by • March 15, 2018

ichapps.com - To describe a standard operating procedure for replacement of coupling bolts of reactors. The standard operating procedure describes in detail the method of replacing coupling bolts of reactors. The responsibility of replacing the coupling bolts of reactors lies with the ...

Breakdown Rectification Of Sifter

Breakdown Rectification Of Sifter

Submitted by • March 15, 2018

ichapps.com - To describe a standard operating procedure for breakdown rectification of sifter. The standard operating procedure describes in detail the method of breakdown rectification of sifter and includes replacement of motor bearings, rectification of burnt motor, replacement of motor pulley and ...